DigiPlus

List of the table of contents of this article:

• 1,DigiPlusWhat is the diskless system tutorial for building a small Internet carea for >20?
• 2, What should be done with the diskless system of the Internet care? About 300 computers, for servers and switches and...
• 3, Use network maintenance to make a diskless system, and there are many clients with different configurations. How to upload only one mirror image to all...

What is the diskless system tutorial for building a small Internet carea for >20?

The diskless system includes a diskless server host (high configuration requirements, according to the number of your diskless workstations), a paid server and proxy server (general configuration is fine), multiple switches, which should be determined according to your actual number of workstations, other network cables, crystal heads, etc.

Install WINXP SP2 workstation version (all partitions are converted to NTFS format, and the XP system is installed on disk C) install in the default way, installSet the computer name to "WKS001" and click "Next" until "Complete" the network configuration of the client. Install the network card driver for the workstation.

-1 The file system of the server The server is generally divided into five disks: C disk is the server system. C: WINNT AND C: WINNTRPLRPLFILES FOLDER SHARING. Sharing is automatically established by the system, and customers should not set it up. C: HARDWARE STORES SOME DRIVERS THAT CAN BE USED BY SERVERS AND CLIENTS.

In the network structure of PXE, DHCP server and BXP server can be made on one computer. Under the BOOTP boot mode, the IP address of the workstation is fixed, and each workstation must be manually specified on the server.

What kind of startup method the diskless system adopts depends on different application environments. The PXE method is used in a smaller and relatively single network. For larger networks, especially when multiple networks are mixed, the application adopts the BOOTP method. The following settings are explained with PXE as an example.

Internet Cafe Quick Self-made System Emergency Recovery Disk Step 1: Use the DOS boot disk or install vFloppy to enter DOS, use Ghost to make a mirror image of the current system and place it in F:.

What should be done with the diskless system of the Internet care? About 300 computers, for servers and switches and...

The diskless system includes a diskless server host (high configuration requirements, according to the number of your diskless workstations), a paid server and proxy server (general configuration is fine), multiple switches, according to your actual The number of international workstations is fixed, other network cables, crystal heads, etc.

The diskless network system using a disk array card only needs to install a RAID card on the server side, which saves a lot of money.For large diskless network systems, the saved hard disk cost will bring the network system upgrade to a higher level.

The principle of the diskless system is very simple. For example, we use many mobile phones to download the same video on the same website and transmit the information to the computer we need through high-speed connection. The update and installation of the game is only on the server side, which avoids the update experience one by one.

It's totally okay. If you have two or more computers, a switch or router is enough. If you only have one machine, you can also do it. It's the same with a virtual machine. In fact, it's very simple to have no plate..

Use network maintenance to make a diskless system, and there are multiple clients with different configurations. How to upload only one mirror image to all...

It is not recommended to start from the same mirror package. You can create a new mirror package of i3 4130+h81+hd7770. Specific method: Install a diskless client on an i3 4130+h81+hd7770 client and upload the mirror image.

So many people think this problem is very tricky. In fact, network transmission can solve this problem very effectively. Through network simultaneous transmission, the system can be installed on these 200 computers in a short time, and the error rate is very low. The time it takes is also short, so it is a very good way to deal with it.

First in the guestInstall the system and driver on the computer, and then install the diskless software, establish the IMG image file of the client on the server, hang the newly built IMG image file on the machine where you make the system, and the client can upload the system.

Easy to use and convenient management: original server-side network card PNP technology, the client no longer needs tedious installation and modification of the network card PNP driver. The first system virtual disk product without multiple configurations and driver separation operation truly realizes one mirror image to cover all configurations.

First of all, you install the system that needs to be installed and make a full backup for GHSOT. Then make a network engraving server--(Find "Chenglong Netwei" in Baidu, which is a very useful network engraving software.

How to open a virtual disk on the computer?Virtual disk Virtual disk is a disk in a remote computer that is virtualized in a local computer. It feels like a hard disk on the local machine. In fact, he is not on the local machine.